- Education
- Wedding Bands & Eternity
- Create Your Custom Eternity Ring or Wedding Band
Wedding and eternity rings
Create Your Custom Eternity Ring or Wedding Band
A custom eternity ring or wedding band starts with five decisions: size, width, metal, how far the stones go around, and how it sits beside your engagement ring. Get those right and the band will look right and wear well for decades.

Quick answer
To create a custom eternity ring, choose the stone size and coverage (half, three-quarter or full), the setting style, the band width and the metal, then fit it to your engagement ring. GemTrove designs and handmakes eternity rings and wedding bands at Unit 903/125 Swanston St, Melbourne VIC 3000. You approve the 3D design and the quote before anything is made. Allow up to 5 weeks.
How do you create a custom eternity ring?
- Ring size first. Full eternity rings are very hard to resize, so the size must be right. See sizing options.
- Choose the coverage: half, three-quarter or full eternity. See half vs full eternity rings.
- Choose the stones: shape, size and quality, natural or lab-grown.
- Choose the setting: claw, shared-claw, channel, bezel or pavé.
- Choose width and metal. Stone size and spacing set the width.
- Fit it to your engagement ring. Flush, curved or notched, so the two sit well together.
- Approve the 3D design, then the band is handmade in our Melbourne workshop.
Half, three-quarter or full eternity?
- Half eternity: stones across the top half only. More comfortable between fingers, lower cost, and can usually be resized.
- Three-quarter eternity: more sparkle from every angle, with a small plain section left for sizing.
- Full eternity: stones all the way round, the most continuous look, but very hard to resize. See can a full eternity ring be resized.
Choosing between an anniversary ring and an eternity ring? See anniversary ring vs eternity ring.
Which eternity rings and diamond bands can be made?
- By stone shape: round, oval, emerald cut, baguette, princess, radiant, pear, marquise, Asscher and cushion, or two shapes alternating.
- By coverage: a few stones across the top, half, three-quarter or full.
- By setting: shared claw, four claw, channel, bar, bezel, pavé, flush and scalloped.
- By stone: natural or lab-grown diamonds, sapphires, rubies and emeralds, one colour or alternating with diamonds.
- By shape of band: straight, curved, contoured to an engagement ring, open, V-shaped (chevron) or a jacket that wraps both sides.
- By occasion: a wedding band, an anniversary ring, a ring for the birth of a child with birthstones, or a band to stack.
- For men: a channel-set or flush-set diamond band, or a single stone set into a plain band.
- Plain bands: flat, court, D-shape, bevelled or knife-edge, polished, brushed or hammered.
See half and full eternity rings compared, the pointer guide to stone sizes and how to stack rings.
Which eternity band setting should you choose?
The setting decides how much of each stone you see, how smooth the band feels and how well the stones are protected. These are the eternity band settings people ask about most:
- Claw or shared-claw: the most light and sparkle; claws need checking over time. See claw types.
- Channel: stones held between walls of metal, smooth and protective. See channel-set diamonds.
- Bezel: each stone ringed in metal, very protective and modern.
- Pavé: many small stones for a fine, glittering band.
- Flush: stones set level with the metal for a minimal look. See flush settings.
Have an idea but not a design yet?
Bring a sketch, a photo or the stones you already own, and we will tell you what can be made, in which metal, and what decides the price.
How do stone size and spacing change the band?
Stone diameter and spacing decide the final band width and the total carat weight, so the design and the price are worked out together. Bigger stones give a bolder band and more total carat weight; smaller stones give a finer band. Round brilliants are most common, but emerald, oval and other shapes make striking bands. See emerald-cut bands and ct vs ctw vs tcw for how total weight is written.
Lab-grown diamonds can give larger stones for the same budget; see lab-grown vs natural diamonds.
Matching matters more in a band than anywhere else. A row of stones shows any difference in size or colour from one to the next, so the stones are matched to each other closely before they are set. Slightly smaller stones that match perfectly look better than larger ones that don't.
How do you make a band fit your engagement ring?
Plan the band around the engagement ring's profile, setting height, stone positions and the way you wear them. A low-set solitaire may sit flush against a straight band; a halo or a low basket usually needs a curved, contoured or notched band. See how to match a wedding band and fitted wedding bands.
Bring the engagement ring to the appointment. Photos help, but the ring itself is far more accurate, and we can scan it to design a precise fit; see ring scanning for CAD.
Designing a plain wedding band
A plain band still has choices: width, thickness, profile and finish all change comfort and look. See band profiles, the best metal for wedding bands, brushed and satin finishes and men's bands for hands-on work.
Which metal should the band be?
Most people match the engagement ring's metal so the two wear evenly. Platinum and gold wear differently, and a band in a harder metal can slowly wear a softer ring it rubs against. See white gold vs platinum, 9k vs 18k gold and mixing metals in a bridal set.
If you are unsure, bring both hands to the appointment and try samples on. Colour and weight are easier to judge on the finger than on a screen.
How can you make it personal?
Engraving inside the band, a hidden stone, milgrain edges or a birthstone among the diamonds. See engraving ideas that stay timeless and milgrain and engraving patterns.
How do eternity rings wear over time?
An eternity ring is worn beside an engagement ring every day, so the two rub and knock against each other. Claws on the band can wear the engagement ring's shoulders, and small stones can loosen after hard knocks. Have both rings checked together once a year. Lower settings, channel and bezel styles, and stones that stop short of the underside all reduce wear. See when claws need retipping and loose stones and stone tightening.
Rhodium-plated white gold bands slowly show a warmer colour as the plating wears, especially where they touch the engagement ring. Replating restores both rings together; see rhodium plating and replating.
How much does a custom eternity ring cost in Melbourne?
A custom eternity ring or wedding band has no fixed price, because it is made to your finger, your stones and your design. You get a quote that covers the stones and the band before anything is made. These are the things that move the price:
- Coverage: a full band uses roughly twice the stones of a half band.
- Stone size and quality: bigger, whiter and cleaner stones cost more, and natural costs more than lab-grown.
- Matching: stones must match each other closely in size and colour, which takes time to source.
- Setting style: pavé and shared-claw bands need more setting work than channel bands.
- Metal: platinum and higher-karat gold cost more, and wider bands use more metal.
Tell us your budget at the start and we design within it. Your quote covers the stones and the band before anything is made.
What is included in the quote for a custom band?
The quote is for the finished ring: the stones, the metal, the design work and the making. You see it before anything is made, and nothing starts until you approve both the design and the figure.
- The stones, natural or lab-grown, matched to each other in size and colour.
- The metal, in the carat and colour you choose. See the best metal for wedding bands.
- The 3D design, which you approve first.
- The making and setting by our master jewellers.
For a plain band, the cost follows the metal, the width and the profile: see custom made wedding bands.
How long does a custom eternity ring take?
Allow up to 5 weeks for a custom eternity ring. Some pieces are ready sooner. The time depends on the design, the metal, and whether stones have to be sourced and matched.
We confirm the time for your piece with the quote, before anything is made. If it is for a date, such as a wedding, a birthday or an anniversary, tell us at the first appointment so the date is part of the plan from the start.
What do GemTrove customers say?
These are Google reviews from GemTrove customers, quoted word for word.
5.0 on Google
★★★★★
“… Raj has been incredible to work with and guided us through designing both our engagement rings last year and now the wedding rings. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”
Tanveer D.
Google review · engagement and wedding rings
★★★★★
“… i have a very custom ring i was after as it was an engagement ring, what i wanted was exactly what i got …”
Eric G.
Google review · custom engagement ring
★★★★★
“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”
The Adsta
Google review · engagement ring
★★★★★
“… His advice on the ring size, design, and overall style was invaluable, and he took the time to ensure every detail was perfect. The entire process was smooth, transparent, and completed within the expected timeframe. …”
Seno R.
Google review · engagement ring
★★★★★
“… We wanted to pick out our preferred stone with GIA certification and then the setting (custom made). … Raj acted with efficient communications to ensure for the transaction to move forward. …”
Whiz
Google review · GIA-certified diamond and custom setting
★★★★★
“… I had a deadline too which he went above and beyond to meet. …”
Gary L.
Google review · ring made to a deadline
Read all GemTrove reviews on Google
When do people buy eternity rings?
Some choose an eternity band as their wedding ring; others add one later for an anniversary, the birth of a child or a milestone birthday. Many design the band at the same time as the engagement ring so the two are made to fit from the start. See designing a bridal set and custom engagement rings in Melbourne.
What should you know before ordering a full eternity ring?
- It cannot be resized in the usual way. The size has to be right when it is made. See can a full eternity ring be resized.
- Stones on the palm side take the knocks. A half or three-quarter band keeps stones away from the hardest wear.
- Very small stones need very fine setting. The finer the beads, the more often they should be checked.
- Soft gemstones are not suited to a band worn every day. See gemstone durability for everyday rings.
We will tell you if the band you have in mind is likely to give trouble, and what would give the same look with less risk.
Where can you design an eternity ring or wedding band in Melbourne?
At our showroom in the Melbourne CBD, by appointment. GemTrove has been in business since 2008, and our family has been in the jewellery trade since 1984.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book a band consultation, and bring your engagement ring.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationFAQ
Common questions
Can a full eternity ring be resized?
Usually not easily, because there is no plain metal to cut or add. That's why the size must be right first. Half and three-quarter bands are easier to resize.
How long does a custom eternity ring take?
Allow up to 5 weeks. Some pieces are ready sooner. We confirm the time with your quote, so tell us at the start if it is for a date.
Can you make a band that fits around my engagement ring?
Yes. Bring the ring and we design a flush, curved or notched band to sit with it, using a scan where it helps.
What is an eternity band setting only?
It usually means a band designed without its stones, so you can supply your own or choose them separately. Ask us if you have stones you would like to use.
Should my wedding band be the same metal as my engagement ring?
It's usually best, so the two wear evenly and match in colour over time.
Can I use lab-grown diamonds in an eternity ring?
Yes. Lab-grown diamonds suit eternity rings well and can give bigger stones within the same budget. They are always identified as lab-grown.
Can I add an eternity ring years after my engagement ring?
Yes. Bring your engagement ring and we design the band to fit it, matching the metal and, where possible, the colour and size of its stones.
How wide should an eternity ring be?
Most sit between about 2 and 3 mm, close to the width of the engagement ring's band. The stone size decides the final width, so we design the two together.
Natural or lab-grown diamonds for an eternity band?
Both work well. Natural diamonds are rarer and cost more; lab-grown diamonds give larger stones for the same budget. Either way, they are always identified clearly.

Ask a gemologist
Not sure how to turn the idea into a piece?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our in-house CAD designers and master jewellers. Bring the idea, the stones or the old jewellery, and he will tell you honestly what will work and what will not.
Keep learning
Related guides
Wedding Bands & EternityHalf Eternity vs Full Eternity Rings
Wedding Bands & EternityHow to Match a Wedding Band to an Engagement Ring
Wedding Bands & EternityCan a Full-Eternity Ring Be Resized?
Wedding Bands & EternityFitted Wedding Bands Explained | Custom Curved Bands
Metals9K vs 18K Gold: Which Gold Is Better for Jewellery?
Wedding Bands & EternityAnniversary Ring vs Eternity Ring
MetalsBest Metal for Wedding Bands
Wedding Bands & EternityBest Wedding Band for Emerald Cut Engagement RingsExplore more
More guides on this topic
Education
