- Education
- Buying Knowledge & Custom Process
- Jewellery Design Process
Custom jewellery journey
Jewellery Design Process
Custom jewellery should feel personal, but the process behind it should be clear and practical. This is every stage, in order, and what you decide at each one.

Quick answer
GemTrove's jewellery design process runs from a design consultation and stone selection through 3D design, your approval, making, setting, finishing and final inspection, at Unit 903/125 Swanston St, Melbourne VIC 3000. Raj Sood, a Graduate Gemologist (GIA), guides the stone choice, our in-house CAD designers model the piece, and our master jewellers make it. Allow up to 5 weeks; some pieces are ready sooner.
What are the steps in the jewellery design process?
GemTrove's process takes you from an idea, an old piece of jewellery or a loose stone to a finished custom-made piece, with clear guidance at each stage.
- The process starts with a consultation and a clear design brief.
- Diamonds, lab-grown diamonds, coloured gemstones or existing stones are assessed.
- Setting style, stone security, comfort, metal choice and wearability guide the design.
- CAD design lets you see the proportions before making, where suitable.
- Final inspection checks stone security, finish, comfort and presentation.
| Step | What you decide |
|---|---|
| 1. Consultation | What the piece is, and what it is for |
| 2. Stones | Which stones, or whether yours are suitable |
| 3. Design | Style, metal, proportions, setting |
| 4. Approval | The 3D design and the quote |
| 5. Making | Nothing: this is our part |
| 6. Inspection and collection | That it is what you approved |
Does the process change with the piece?
The six steps stay the same. What changes is where the care goes.
| Piece | What the design has to get right |
|---|---|
| Engagement ring | The stone's security, the height of the setting, and room for a wedding band beside it |
| Wedding or eternity band | The fit against the engagement ring, and a size that cannot easily be changed later |
| Earrings | Two stones that match, weight the ear can carry, and backs that hold |
| Pendant | Balance, so it hangs straight and does not flip |
| Tennis bracelet | Flexible links, a secure clasp and the exact wrist length |
| Signet ring or cufflinks | Detail bold enough to survive years of wear |
| A remodel | What can be reused safely, checked before anything is designed |
| A piece around your own stone | Exact measurements of the stone, taken or scanned first |
See from CAD to casting and handmade and CAD rings compared.
Step 1: what happens at the design consultation?
The first stage is understanding what you want to create. It may be a custom engagement ring, a pendant, a pair of earrings, a bracelet, a dress ring, a wedding band, an heirloom redesign or a complete remake of old jewellery.
- Bring your ideas. Photos, sketches, old jewellery, online inspiration, gemstone certificates, valuation documents, or a simple description of the style you like.
- Talk through practical needs. Lifestyle, how often the piece will be worn, preferred metal, stone security, comfort and profile.
- Set the budget and any date.
See what happens at a custom ring consultation, how to write a clear design brief and how lifestyle should shape the design. You can book a consultation in person or online.
Step 2: how are stones chosen or assessed?
You choose a natural diamond, a lab-grown diamond or a coloured gemstone, or your existing stone is assessed for reuse. New stones are compared side by side with their grading reports. Natural and lab-grown are always shown and described separately.
An existing stone is examined under magnification and measured before any design is drawn, because chips, wear and unusual proportions change what can be built around it. See the diamond buying guide, how to compare two diamonds, reusing a family diamond and bringing your own stone. Please check the lab report before you commit.
Look at stones before your appointment
Have an idea but not a design yet?
Bring a sketch, a photo or the stones you already own, and we will tell you what can be made, in which metal, and what decides the price.
Step 3: how is the piece designed?
With the stones known, the design is worked out: setting style, metal, proportions and how the piece sits when worn. For most pieces it is then modelled in 3D by our in-house CAD designers, around the exact measurements of your stones.
- Setting style. See the setting styles guide and the diamond and gemstone setting guide.
- Metal. See the best metal for engagement rings and white gold vs platinum.
- Proportions. See why exact measurements matter.
- How it wears. See low vs high profile settings.
You review renders from several angles. See how to read a CAD render and our CAD jewellery design page.
Step 4: what do you approve before making starts?
Two things: the design and the quote. You can ask for changes to the design until it is right. The quote covers the stones, the metal and the making of the piece you have approved. Nothing is made, and nothing of yours is taken apart, until you have agreed to both.
This is the point of no return for the design, so it is worth slowing down. See questions to ask before ordering and whether you need a wax or resin model first.
Step 5: how is the piece made?
The piece is made by our master jewellers in our Melbourne workshop. Depending on the design it is cast from the approved model, built by hand from metal stock, or both. The stones are then set, and the piece is finished and polished.
See from CAD to casting, cast vs hand-fabricated jewellery and handmade vs CAD. For what each stage of a ring involves, see the engagement ring timeline.
Step 6: what is checked at final inspection?
The finished jewellery is checked for stone security, finish, comfort, proportions and presentation, against the design you approved.
- Every stone is tested for movement under magnification.
- The finish is checked for marks, and for even colour on white gold.
- The fit is tried on you where that is possible.
- Engraving and hallmarks are checked. See Australian hallmarks and metal stamps.
You collect the piece from the showroom, or it is sent within Australia by tracked Australia Post. A valuation for insurance can be prepared: see jewellery valuations for insurance and our valuation service.
How much does custom jewellery design cost?
The quote is for the finished piece; there is no set price for the process. You see the figure at step 4, before anything is made. These are the things that move it:
- The stones. Usually the largest part. See the diamond price guide.
- The metal and its weight. See how gold prices affect jewellery prices.
- The design. A design made from scratch involves more modelling than an adaptation of a classic.
- The setting work. Many small stones take longer to set than one.
- What you supply. Your own stones or metal, after assessment.
- Changes. Changes during design are expected. Changes after making starts mean remaking.
Tell us your budget at step 1. See how much to spend on an engagement ring for how to think about the total.
How long does the whole process take?
Allow up to 5 weeks for the jewellery design process. Some pieces are ready sooner. The time depends on the design, the metal, and whether stones have to be sourced and matched.
We confirm the time for your piece with the quote, before anything is made. If it is for a date, such as a wedding, a birthday or an anniversary, tell us at the first appointment so the date is part of the plan from the start.
What do GemTrove customers say?
These are Google reviews from GemTrove customers, quoted word for word.
5.0 on Google
★★★★★
“… Raj has been incredible to work with and guided us through designing both our engagement rings last year and now the wedding rings. … The craftsmanship and attention to detail are outstanding, and the rings turned out even more beautiful than we imagined. …”
Tanveer D.
Google review · engagement and wedding rings
★★★★★
“… i have a very custom ring i was after as it was an engagement ring, what i wanted was exactly what i got …”
Eric G.
Google review · custom engagement ring
★★★★★
“Raj is very friendly and knowledgeable on all things diamonds. I went to him to make an engagement ring for me after seeing all his positive reviews. He helped me design the perfect ring. He listened to everything I was looking for and gave me great advice along the way.”
The Adsta
Google review · engagement ring
★★★★★
“… His advice on the ring size, design, and overall style was invaluable, and he took the time to ensure every detail was perfect. The entire process was smooth, transparent, and completed within the expected timeframe. …”
Seno R.
Google review · engagement ring
★★★★★
“… We wanted to pick out our preferred stone with GIA certification and then the setting (custom made). … Raj acted with efficient communications to ensure for the transaction to move forward. …”
Whiz
Google review · GIA-certified diamond and custom setting
★★★★★
“… I had a deadline too which he went above and beyond to meet. …”
Gary L.
Google review · ring made to a deadline
Read all GemTrove reviews on Google
What can go wrong, and how is it avoided?
- Designing before the stone is known. The setting is built to the stone, so the stone comes first.
- Approving a render you have not looked at from the side. Height and profile are where surprises come from.
- Leaving the date until late. Tell us at the first appointment. See when to order the ring and what can and cannot be rushed.
- Guessing the size. See the ring size guide.
- Expecting the finished piece to match the screen exactly. Real metal and stones look better, and different.
After you have the piece, it needs care and an occasional check: see the engagement ring care guide and our jewellery repairs page.
Where can you have custom jewellery made in Melbourne?
At our showroom on Swanston Street, opposite Melbourne Town Hall, by appointment. GemTrove has been in business since 2008 and our family has been in the jewellery trade since 1984. Every piece is quoted once the design is agreed; we do not quote a price over the phone. Allow up to 5 weeks; some pieces are ready sooner.
- Showroom: Unit 903/125 Swanston St, Melbourne VIC 3000 (Level 9), opposite Melbourne Town Hall, by appointment.
- Hours: Monday to Friday 9:30 am to 5:30 pm, Saturday 11:30 am to 1:00 pm, Sunday closed.
- Phone: 0488 878 000.
- Book: book a design appointment. Bring photos, sketches, old jewellery, stones and any certificates.
Free consultation
Talk to a gemologist
Compare stones in person or online with Raj Sood, Graduate Gemologist (GIA), AJP (GIA).
Book a consultationShop this shape
FAQ
Common questions
What are the steps in designing custom jewellery?
Consultation, stone selection, design in 3D, your approval of the design and quote, making and setting, then final inspection and collection.
How long does the jewellery design process take?
Allow up to 5 weeks. Some pieces are ready sooner. We confirm the time with your quote, so tell us at the start if it is for a date.
Do I need to know what I want before the consultation?
No. Photos of things you like and dislike are enough. The consultation is where the brief is worked out.
Can I make changes to the design?
Yes, during the design stage, as many as it takes. After you approve and making starts, a change means remaking.
Can I use my own stones or old jewellery?
Often, yes. They are examined first. See our jewellery remodelling page.
Will I see the piece before it is made?
You see it as 3D renders from several angles. Nothing is made until you approve them.
Is there aftercare?
Yes. We tell you how to look after the piece and when to have it checked, and we can prepare a valuation for insurance.

Ask a gemologist
Not sure how to turn the idea into a piece?
Raj Sood is a Graduate Gemologist (GIA) who works alongside our in-house CAD designers and master jewellers. Bring the idea, the stones or the old jewellery, and he will tell you honestly what will work and what will not.
Keep learning
Related guides
Buying Knowledge & Custom ProcessWhat Happens at a Custom Engagement Ring Consultation?
Buying Knowledge & Custom ProcessFrom CAD to Casting: How a Custom Ring Is Made
Buying Knowledge & Custom ProcessHow to Write a Clear Engagement Ring Design Brief
Buying Knowledge & Custom ProcessHow to Read an Engagement Ring CAD Render
MetalsAustralian Hallmarks and Metal StampsMetalsBest Metal for Engagement Rings
Engagement Rings & SettingsBring Your Own Diamond or Gemstone Setting
Buying Knowledge & Custom ProcessCAD Jewellery DesignExplore more
More guides on this topic
Education
